Fault Injection Power, EM & Laser Station II

This setup will give you all the fault injection capabilities you need to start with Voltage, EM and Laser glitching on embedded devices. The bundle also consists of devices used for voltage and EM glitching attacks, where the heart is formed by our Spider, which can communicate over lots of protocols to all your targets and is capable of clock glitching too. Advanced pattern-based triggering is part of this setup through the Riscure icWaves device with unmatched precision and speed to give you accurate timing whenever needed. In addition to that, this setup enables you to do laser attacks. The Riscure compact laser can easily be mounted on the XYZ stage, also used for EM glitching attacks. The Inspector software will help execute precise laser attacks on your targets easily. The setup is completed with a workstation fit for purpose and the complete Inspector FI installation with both a Java and Python framework for you to use. To get you up to speed as fast as possible, we will install all equipment on-site and train your staff so that they can get started immediately.

 Includes:

• • Laser station 2 & Safety Box
  • 1064nm NIR Diode Laser (20W, 25MHz, multimode)
  • 808nm Deep Red Diode Laser (14W, 25MHz, multimode)
  • Alphanov/Riscure laser 1064nm single mode diode laser
  • EM-FI Transient Coils (High precision)
  • EM-FI Transient Probe APW
  • EM-FI Transient Probe
  • BBI probe tips
  • Glitch Amplifier
  • High Power Glitch Amplifier
  • icWaves
  • Transceiver
  • Spider
  • PicoScope 3206D Oscilloscope
  • Pinata H training target
    
  • Inspector subscription FI professional - 3 years
  • License:
    • 1x Inspector subscription seat(s) with dongle included
  • Workstation for Inspector
  • Training:
    • 4 trainees Essential FI Training - 2 days
    • 4 trainees Advanced FI Training - 2 days
    • 2 trips for 1 trainer included
    • 1-day installation